linux添加路由信息下一跳地址-Linux路由表添加下一跳地址 (linux添加静态路由)

Introduction

Linux operating systems are known FOR their robustness, scalability, and security. One of the key features of Linux systems is the flexibility offered by the netfilter/iptables framework, which allows system administrators to set up packet filtering rules to control network traffic.

In this tutorial, we will discuss how to add a next-hop address to the Linux routing table. We will start by explning the concept of a routing table, and then we will move on to the procedure for adding a next-hop address.

Routing Table

When a packet is sent from one device to another, it typically traverses multiple network devices (e.g., switches, routers) before reaching its destination. Each device That the packet passes through needs to know how to route the packet to the next hop on the path to the final destination.

The routing table is a key component of a network device’s routing infrastructure. It is a>香港服务器首选树叶云，2H2G首月10元开通。树叶云（shuyeidc.com）提供简单好用，价格厚道的香港/美国云 服务器 和独立服务器。IDC+ISP+ICP资质。ARIN和APNIC会员。成熟技术团队15年行业经验。

linux怎么添加静态路由

添加静态路由有两种方法： 1、用route命令添加：此方法在重启网卡或服务器后就会失效 route add -net 10.10.0.0 netmask 255.255.0.0 gw 10.10.10.1 eth0 2、创建配置文件/etc/sysconfig/network-scripts/route-eth0

如何添加永久静态路由

按 win键+X键，在弹出的列表中选择“命令提示符（管理员）”使用dos命令添加静态路由接下来我们所有的操作都是基于“route”命令来实现，可以再命令提示里面输入“ route ？”查看route命令的帮助及语法使用dos命令添加静态路由以图中内容为例，我这里添加了一条去往 10.10.10.0/24网段的静态路由，指定去往此网段的路由都走 172.20.153.254网关，确认添加的内容无误后按回车，弹出“操作完成！”内容表示路由添加成功；其中此处用到的几个参数的作用是：-p 表示永久路由，重启后不丢失Add 添加路由10.10.10.0 表示目的网段的网络地址Mask 固定命令，后面跟的是目标网段的子网掩码172.20.153.254 是去往目的网段的吓一跳使用dos命令添加静态路由可以通过“route print”命令来查看听见的静态路由使用dos命令添加静态路由可通过 “route delete 目的网段网络地址”删除添加的静态路由使用dos命令添加静态路由

如何对几个IP添加一个静态路由

静态路由汇总按子网将21.1.0.0网段不同的连续ip各指向不同的吓一跳地址。举例：（1）21.1.0.0-21.1.127.254 指向24.1.254.1 （2）21.1.128.0-21.1.255.254指向24.1.253.1ip route 20.1.0.0 255.255.255.128 24.1.254.1 ip route 20.1.128.0 255.255.255.128 24.1.253.1